Over the years I accumulated a lot of G Scale rolling stock, a mix of 1:32, 1:29, 1:24, 1:22.5 and 1:20.5. Included in that collection is around 15 engines. Strawberry Fields would be uncomfortable running more than 3 engines at a time. So a fair amount of focus narrowing and pruning is appropriate.
I’m a narrow gauge guy which means that 1:20.3 would be the dominant scale. The era is 1900 +/- 20 years. So a lot of my G scale is currently being auctioned on eBay. I want to pare my engine collection down to 6-7 engines. Because logging is a major industry the following engines make the cut for sure as electrically powered locomotives
- A Bachmann Spectrum 2 Truck Shay – an obvious choice for a logging locomotive
- A Bachmann Spectrum Climax – another obvious choice for a logging locomotive
- A Bachmann Spectrum 4-4-0 – Bashed into NPC No 6
- A second Bachmann Spectrum 4-4-0 kit bashed into NPC No 21 – the first Cab Forward
- A Bachmann Spectrum 2-6-0
- A Bachmann Annie 4-6-0 – This is lettered for the WP&Y and pulls a consist of WP&Y passenger cars.
In addition I have the following live steam locomotives:
- An Accucraft Ruby bashed into a Hawaiian plantation engine once owned by Ward Kimble
- An Accucraft Ruby custom built to model the steam engines that once ran in frontier land in Disney World
- A kit designed to build a Class A Climax.
I haven’t decided how to support the live steam locomotives.
Mode of operation for the electric locomotives is radio controlled DCC battery powered. I’ve chosen Airwire as the primary manufacturer. Unfortunately, this adds around $400 per engine. It’s crazy to invest that much money when at most three will run at a time. I’ve decided to solve the expense problem with battery cars.
- The logging battery car will be a flat car load that carries a log skidder and crane. This battery car will primarily serve the two geared logging engines.
- The general battery car will be a box car. It will serve whatever engine is pulling a general freight consist.
- The passenger battery car will be a combine. It will serve the passenger consist and also mixed consists.
- A fourth battery car could be added as flat with a lumber load.
Note that the proceeds from the sale of engines and rolling stock that don’t fit in will be used to fund the radio control battery powered gear as well as consists that fit better with the layout concept.
There is also one more set of locomotives and consists I want to support. I want neighborhood kids to experience the joy of running trains in Strawberry Fields. I have a Lionel set that is radio controlled battery powered that would fit this need. Unfortunately these sets all operate on the same frequency so I can only support one. But if one of the above battery cars is relatively kid-proof (like the lumber load), I could support a Big Hauler set pulling inexpensive freight cars.
My goal is to have at least two battery cars and two locomotives converted by spring of 2017. Builders logs that follow will take you through the steps.